Hobart Welders

 
Hobart Welders is one of several companies that offers a variety of wire-feed welders, so as you peruse this website you are sure to find the product of your choice.
Hobart 10, 000 watt Generator Welder New
Hobart 10, 000 watt Generator Welder New
$2,950.00
Time Left: 21m
EK-1151 HOBART R 400-S MEGA ARC 400 WELDER, 230 460 1PH
EK-1151 HOBART R 400-S MEGA ARC 400 WELDER, 230 460 1PH
$300.00 (1 Bids)
Time Left: 4h 28m
HOBART GAS WELDER GENERATOR
HOBART GAS WELDER GENERATOR
$1,100.00 (0 Bids)
Time Left: 19h 12m
Hobart RC-500 welder with Hobart 27 Wire Feed
Hobart RC-500 welder with Hobart 27 Wire Feed
$425.00
Time Left: 1d 23h 58m
Hobart RC-250 welder with Hobart 2200 Wire Feed
Hobart RC-250 welder with Hobart 2200 Wire Feed
$425.00
Time Left: 2d
HOBART  HANDLER 140 MIG WELDER & CART  NEW 500500 -
HOBART HANDLER 140 MIG WELDER & CART NEW 500500 -
$574.10
Time Left: 2d 1h 22m
Hobart Stickmate AC Welder 230V,  205 Amp 500502
Hobart Stickmate AC Welder 230V, 205 Amp 500502
$269.99
Time Left: 2d 7h 50m
Hobart Stickmate AC Welder 230V,  205 Amp 500502
Hobart Stickmate AC Welder 230V, 205 Amp 500502
$269.99
Time Left: 2d 14h 20m
Hobart Stickmate AC Welder 230V,  205 Amp 500502
Hobart Stickmate AC Welder 230V, 205 Amp 500502
$269.99
Time Left: 2d 21h 14m
Hobart Tig  welder foot control lincoln miller Mdl 1411
Hobart Tig welder foot control lincoln miller Mdl 1411
$29.00 (0 Bids)
Time Left: 3d 1h 56m
Hobart Handler® 210 Mig Welder 220 volt With Spool Gun
Hobart Handler® 210 Mig Welder 220 volt With Spool Gun
$999.00
Time Left: 3d 7h 58m
Hobart Stickmate AC Welder 230V,  205 Amp 500502
Hobart Stickmate AC Welder 230V, 205 Amp 500502
$269.99
Time Left: 3d 11h 14m
The Handler 135 is Hobarts welders lightweight 115-volt machine. It markets in the five hundred dollar range. The Hobart Handler 135 weighs only fifty five pounds and welds low-carbon steel from thin 22 gauge to 3/16 inch thick. It comes out of the box ready to weld with flux-core wire, and it's equipped with a gas regulator and solenoid valve, plus the associated hardware for using the welder with shielding gas.
 
It's worth noting, in case you've never used a wire-feed welder with shielding gas, that you would have to buy or fabricate a welding cart to make gas shielding practical. Small wire-feed welders such as Hobart's, are impractical without a means of holding up the tank for the shielding gas. Sure, you could position the welder on a bench and chain the tank to a column or to wall brackets, but then you'd be forced to always bring the work to the welder, and that's not always possible.

Your Welding Source